15 years of professional reform experience create brilliant in market

It has been proved that the energy-saving effect of electro-hydraulic hammer is more than 80%. It is an effective way to step out of the dilemma of high energy consumption and low benefit for forging industry through energy-saving transformation.

1. The Current situation description of electro-hydraulic hammer

The development of electro-hydraulic hammer benefits from its huge energy-saving effect. In addition to the advantages of hydraulic pneumatic hammer in transmission principle, it also has considerable advantages in structural control.

通过传感器对液压油的清洁度,温度,压力,液位等进行监察,一旦出现不符合系统运转条件的现象即自动报警,并可实现自我保护,停锤甚至停机.

Through the sensor to monitor the cleanliness, temperature, pressure, liquid level of hydraulic oil, once the phenomenon does not meet the operating conditions of the system, it will automatically alarm, and can realize self-protection, stop hammer or even stop the machine.

采用自动控制系统,使每锤的打击能量及每个工件的打击次数均能按需得到控制,使得打击系统的振动情况大为改善,打击噪音大大降低,同时降低了对操作者的技术要求,锻件的精度也相对稳定,设备运行的可靠性及模具的寿命均得到提高.

By using automatic control system, the striking energy of each hammer and the number of striking times of each workpiece can be controlled on demand. The vibration of the striking system is greatly improved and the striking noise is greatly reduced. At the same time, the technical requirements for operators are reduced. The precision of forgings is relatively stable. The reliability of equipment operation and the service life of dies are improved.

据不完全统计,我国拥有可进行改造的电液锤近2500台,节能效果在90%以上已被证明,锻造行业通过对其进行及节能改造,不失为一个步出高能耗低效益困境的有效途径.

2. Electro-hydraulic hammer servo energy saving principle

The rod chamber of the working cylinder always passes through constant pressure oil. When the pressure oil is fed into the non rod chamber, the rod cavity and the rod free cavity are connected at the same time to realize differential, and the hammer head drops rapidly under the action of itself and oil pressure to realize striking. After the impact, the rodless chamber is connected with the oil return port, and the path to the rod chamber is cut off at the same time. The hammer head returns quickly under the action of the pressure oil in the rod chamber.

采用此原理的液压锤,既克服了进油打击方式液气锤有杆腔压缩气体少量泄漏即影响锤头不能正常回程及回程速度,位置难以得到控制的缺陷,又克服了放油打击方式液气锤闷模时间长,回弹连击,回程速度慢,打击频率低等缺点.

The hydraulic hammer based on this principle not only overcomes the defects of small amount of compressed gas leakage in rod cavity of hydro pneumatic hammer in oil feeding striking mode, which affects the normal return of hammer head and the difficulty to control the return speed and position of hammer head, but also overcomes the disadvantages of long mold clamping time, springback continuous strike, slow return speed and low strike frequency.

3. Servo system Advantage

1) Super energy saving: energy saving rate 45%-80%

2) Super stability: Widely speed rang and strong overload capacity

3) Excellent voltage range: 330V-600V

4) Both have motor KTY and PTC overheating protection function

5) Many additional green values: Extend the using life, Low noise, Reduce the use of cooling water

6) We supply the whole completed servo system:Including servo driver, servo motor, SUMITOMO gear pump, electric cabinet, electric resistance, pressure sensor, magnet ring, press-flow shields semaphore wire, power cable, oil flange, oil suction pipe, semaphore converts board, U-steel and so on

4. Specification

  Hangzhou SEBOS Energy Saving Equipment co., LTD focuses on electro-hydraulic servo and servo robot automation industry.  We strives to create the core competitiveness of enterprises for customers, through the four steps of "energy saving, automatic production, improving efficiency and cloud management "

   After years of unremitting efforts and struggle, Now our company has modern factories and production lines, as well as testing equipment, and also attracted a large number of professional technical and management personnel. Our company boasts more than 60 senior engineers engaged in development and design of product R&D, system debugging, performance test, process adjustment, etc. Meanwhile, our company makes full use of our own advantages, cooperates with the domestic colleges, grasps the leading theory of the energy conservation technology and makes constant innovations.

Persistence virtue wins trust—— SEBOS focuses on energy saving and automation equipment of plastic industry!

                                                                                                Profession Concentration Dedication